01 · 声衬与阻抗Acoustic Liners & Impedance
非均匀声衬如何散射声音,阻抗又如何识别?How do non-uniform liners scatter sound, and how is impedance identified?
研究方法Approach
以傅里叶展开和 Wiener–Hopf 方法描述周向非均匀声衬及刚性拼接条;结合代理模型或混合神经网络开展切向流阻抗反演,并用理论、数值与实验资料对照。Fourier expansions and Wiener–Hopf methods describe azimuthally non-uniform liners and rigid splices. Surrogate or mixed-neural-network models support grazing-flow impedance identification, assessed against theoretical, numerical and experimental data.
研究目的Purpose
理解软硬边界与流动条件的影响,为所研究管道的声衬分析和参数设计提供依据。Understand hard–soft interfaces and flow effects to support liner analysis and parameter design for the studied ducts.
对应论文 · 7 篇Related publications · 7
- 2018
Jiang H, Lau A, Huang X*. Sound wave scattering in a flow duct with azimuthally non-uniform liners. Journal of Fluid Mechanics, 2018, 839: 644-662.
↗周向非均匀声衬流动管道中的声波散射Jiang H, Lau A, Huang X*. Sound wave scattering in a flow duct with azimuthally non-uniform liners. Journal of Fluid Mechanics, 2018, 839: 644-662.
Jiang H, Lau A, Huang X*. Sound wave scattering in a flow duct with azimuthally non-uniform liners. Journal of Fluid Mechanics, 2018, 839: 644-662.
查看原文View publication ↗新型声衬设计常采用具有非均匀阻抗分布的材料,因此需要新的建模与分析方法。本文建立理论模型,研究轴对称流动管道中管壁带半无限、周向非均匀声衬时的声波散射。将傅里叶级数展开引入 Wiener–Hopf 方法后,得到具有矩阵核的解析模型,再通过去极点法分解矩阵核以获得闭式解。研究还提出求解去极点技术相关留数的新数学方法,并通过与相应计算结果比较验证模型。该模型不仅揭示周向非均匀声衬与轴向硬—软界面的可能物理效应,也增强了对实际重要复杂构型的理论建模能力,可用于研究流动管道被动降噪的新型声衬设计。
Novel acoustic liner designs often incorporate new materials with non-uniform impedance distributions. Therefore, new methods are required for their modelling and analysis. In this paper, a theoretical model is developed to investigate the scattering of sound waves from an axially symmetrical flow duct with a semi-infinite, azimuthally non-uniform acoustic lining on the duct wall. More specifically, the incorporation of Fourier series expansions into the Wiener–Hopf method leads to an analytical model with a matrix kernel, which is further factorised by using the pole-removal method to obtain a closed-form solution. A new mathematical method is developed to solve the residues associated with the pole-removal technique. The proposed model has been verified and validated by comparing with corresponding computational results. In addition to shedding light on the possible physical effect of azimuthally non-uniform liners along with an axial hard–soft interface, the current model enhances the theoretical modelling capability for a complicated set-up of practical importance, and can be used to investigate new liner designs for passive noise control in flow ducts.
- 2018
Jiang H, Lau A, Huang X*. Surrogate model based liner optimization for aeroengines and comparison with finite elements. Journal of Vibration and Acoustics, 2018, 140(3): 034501.
↗基于代理模型的航空发动机声衬优化及其与有限元的比较Jiang H, Lau A, Huang X*. Surrogate model based liner optimization for aeroengines and comparison with finite elements. Journal of Vibration and Acoustics, 2018, 140(3): 034501.
Jiang H, Lau A, Huang X*. Surrogate model based liner optimization for aeroengines and comparison with finite elements. Journal of Vibration and Acoustics, 2018, 140(3): 034501.
查看原文View publication ↗数值优化对低噪声航空发动机声衬设计十分有用。现代计算工具虽然能高效完成单次发动机噪声传播模拟,但宽频声衬优化需要成千上万次计算,其高昂成本使这些工具难以直接用于该任务。为使台式计算机能够开展快速优化,本文提出基于 Wiener–Hopf 方法的高效解析求解器。该方法虽能在秒量级给出预测,但通常采用均匀背景流中的理想直管假设,其实际适用性存在争议。本文利用该求解器优化半无限环形管道中的声衬,并将其降噪效果与针对非均匀背景流下实际发动机进气道、直接采用有限元求解器得到的优化声衬进行比较。两类求解器给出的近场和远场解几乎一致,说明所提优化策略兼具准确性和高效率。因此,该 Wiener–Hopf 求解器适用于实际构型的声衬优化,对低噪声航空发动机初步设计具有价值。
Numerical optimizations are very useful in liner designs for low-noise aeroengines. Although modern computational tools are already very efficient for a single aeroengine noise propagation simulation run, the prohibitively high computational cost of a broadband liner optimization process which requires hundreds of thousands of runs renders these tools unsuitable for such task. To enable rapid optimization using a desktop computer, an efficient analytical solver based on the Wiener–Hopf method is proposed in the current study. Although a Wiener–Hopf-based solver can produce predictions very quickly (order of a second), it usually assumes an idealized straight duct configuration with a uniform background flow that makes it arguable for practical applications. In the current study, we employ the Wiener–Hopf method in our solver to produce an optimized liner design for a semi-infinite annular duct setup and compare its noise-reduction effect with an optimized liner designed by the direct application of a numerical finite element solver for a practical aeroengine intake configuration with an inhomogeneous background flow. The near-identical near- and far-field solutions by the Wiener–Hopf-based method and the finite element solvers clearly demonstrate the accuracy and high efficiency of the proposed optimization strategy. Therefore, the current Wiener–Hopf solver is highly effective for liner optimizations with practical setups and is very useful to the preliminary design process of low-noise aeroengines.
- 2017
Jiang H, Huang X*. Efficient impedance eductions for liner tests in grazing flow incidence tube. Journal of Vibration and Acoustics, 2017, 139(3): 031002.
↗掠流入射管声衬测试中的高效阻抗反演Jiang H, Huang X*. Efficient impedance eductions for liner tests in grazing flow incidence tube. Journal of Vibration and Acoustics, 2017, 139(3): 031002.
Jiang H, Huang X*. Efficient impedance eductions for liner tests in grazing flow incidence tube. Journal of Vibration and Acoustics, 2017, 139(3): 031002.
查看原文View publication ↗本文将代理模型与 Wiener–Hopf 方法结合,提出用于掠流入射管的高效阻抗反演方法,可在一系列参数取值与工况下快速预测声学响应并有效反演阻抗。通过分别与理论结果、数值预测和实验测量比较,对该方法进行了验证。各项验证均表明,所提出的求解器具有用于声衬参数研究与优化的能力和潜力。
This paper presents an efficient impedance eduction method for grazing flow incidence tube by using a surrogating model along with the Wiener–Hopf method, which enables rapid acoustic predictions and effective impedance eductions over a range of parametric values and working conditions. The proposed method is demonstrated by comparing to the theoretical results, numerical predictions, and experimental measurements, respectively. All the demonstrations clearly suggest the capability and the potential of the proposed solver for parametric studies and optimizations of the lining methods.
- 2016
Jiang H, Huang X. Impedance eduction with a theoretical model for sound propagation in a grazing impedance tube. AIAA/CEAS Aeroacoustics Conference, 2016.
基于掠流阻抗管声传播理论模型的阻抗反演Jiang H, Huang X. Impedance eduction with a theoretical model for sound propagation in a grazing impedance tube. AIAA/CEAS Aeroacoustics Conference, 2016.
Jiang H, Huang X. Impedance eduction with a theoretical model for sound propagation in a grazing impedance tube. AIAA/CEAS Aeroacoustics Conference, 2016.
该论文的中文摘要尚未收录。
The English abstract has not yet been added.
- 2016
Liu X, Jiang H, Huang X*, Chen S. Theoretical model of scattering from flow ducts with semi-infinite axial liner splices. Journal of Fluid Mechanics, 2016, 786: 62-83.
↗带半无限轴向声衬接缝流动管道散射的理论模型Liu X, Jiang H, Huang X*, Chen S. Theoretical model of scattering from flow ducts with semi-infinite axial liner splices. Journal of Fluid Mechanics, 2016, 786: 62-83.
Liu X, Jiang H, Huang X*, Chen S. Theoretical model of scattering from flow ducts with semi-infinite axial liner splices. Journal of Fluid Mechanics, 2016, 786: 62-83.
查看原文View publication ↗本文建立理论模型,研究半无限声衬表面被等间距刚性接缝覆盖的流动管道声散射问题,该问题对低噪声航空发动机开发具有实际意义。主要贡献是结合傅里叶级数展开与 Wiener–Hopf 方法,对轴向声衬接缝作出严格解析描述。傅里叶级数用于描述半无限声衬表面的周期变化,准确表示接缝在周向的布局。相应矩阵核包含常数矩阵和对角矩阵,后者由一系列典型标量核组成,可通过标准 Wiener–Hopf 标量核分解获得闭式解。实现时采用无限傅里叶级数数值截断等合理近似,并与商业声学求解器结果比较验证。多个算例说明,模型能够揭示轴向及周向硬—软界面共同作用产生的关键声学效应。
In this paper we present a theoretical model to study sound scattering from flow ducts with a semi-infinite lining surface covered by some equally spaced rigid splices, which is of practical importance in the development of silent aeroengines. The key contribution of our work is the analytical and rigorous description of axial liner splices by incorporating Fourier series expansion and the Wiener–Hopf method. In particular, we describe periodic variations of the semi-infinite lining surface by using Fourier series that accurately represent the layout of rigid splices in the circumferential direction. The associated matrix kernel involves a constant matrix and a diagonal matrix. The latter consists of a series of typical scalar kernels. A closed-form solution is then obtained by using standard routines of Wiener–Hopf factorisation for scalar kernels. A couple of appropriate approximations, such as numerical truncations of infinite Fourier series, have to be adopted in the implementation of this theoretical model, which is validated by comparing favorably with numerical solutions from a commercial acoustic solver. Finally, several numerical test cases are performed to demonstrate this theoretical model. It can be seen that the proposed theoretical model helps to illuminate the essential acoustic effect jointly imposed by axial and circumferential hard–soft interfaces.
- 2015
Liu X, Jiang H, Huang X. Theoretical study of sound propagation in lined duct with rigid splices using Wiener-Hopf Method. AIAA/CEAS Aeroacoustics Conference, 2015.
采用 Wiener–Hopf 方法研究带刚性接缝声衬管道中的声传播Liu X, Jiang H, Huang X. Theoretical study of sound propagation in lined duct with rigid splices using Wiener-Hopf Method. AIAA/CEAS Aeroacoustics Conference, 2015.
Liu X, Jiang H, Huang X. Theoretical study of sound propagation in lined duct with rigid splices using Wiener-Hopf Method. AIAA/CEAS Aeroacoustics Conference, 2015.
本文提出理论模型,研究半无限声衬表面被等间距刚性接缝覆盖的流动管道声散射问题,这对低噪声航空发动机发展具有实际意义。主要贡献是结合傅里叶级数展开与 Wiener–Hopf 方法,对轴向声衬接缝进行严格解析描述。半无限声衬区域内沿周向周期分布的接缝用傅里叶级数表示,得到的矩阵核包括常数矩阵和对角矩阵;后者由若干标量核组成,可采用标准标量核分解程序处理。通过数值算例验证该理论模型,并利用多组参数研究揭示轴向及周向硬—软界面对声散射的关键影响。
A theoretical model is presented in this paper to study sound scattering from flow ducts with semi-infinite lining surface covered by equal-spaced rigid splices, which is of practical importance in developments of silent aeroengine. The key contribution of our work is the analytical and rigorous description of axial liner splices by incorporating Fourier series expansion and Wiener-Hopf method. The distribution of the circumferentially periodical splices in semi-infinite liner region is described using Fourier series. The resulted matrix kernel involves a constant matrix and a diagonal matrix, the latter of which consists of a couple of scalar kernels that a standard routines of scalar kernel factorization could be utilised. This theoretical model is validated by numerical test cases. The essential acoustic scattering effect imposed by axial and azimuthal hard-soft interfaces is illuminated with several parametric study cases.
- 2026
Han T, Lu H, McFarland DM, Jiang H. Fusion of FEA and SEA for mid-frequency acoustics in a variable-section duct: Impedance-based coupling and experimental validation. Journal of Computational and Applied Mathematics, 2026, 484: 117481.
↗变截面管道中频声学的 FEA–SEA 阻抗耦合Fusion of FEA and SEA for mid-frequency acoustics in a variable-section duct: Impedance-based coupling and experimental validation
Han T, Lu H, McFarland DM, Jiang H. Fusion of FEA and SEA for mid-frequency acoustics in a variable-section duct: Impedance-based coupling and experimental validation. Journal of Computational and Applied Mathematics, 2026, 484: 117481.
查看原文View publication ↗本文结合有限元分析(FEA)与统计能量分析(SEA),计算两腔阶梯声学管道的中频响应。腔室 1 尺寸为 0.644×0.045×0.045 m,腔室 2 为 0.17×0.02×0.02 m,两者同轴连接,由腔室 1 外端扬声器驱动。在全消声室内开展 178–11220 Hz 测试。按模态数量分类,腔室 1 在 1415–8913 Hz 内表现为一维与三维混合子系统,采用统计建模;腔室 2 保持一维特征,采用确定性建模。两者通过阻抗动态凝聚为单自由度的界面耦合。由阻抗管测得吸声系数推导内部损耗因子;声源表征在第一截止频率 3811 Hz 以下采用多传声器方法,更高频率采用平面波近似。腔室 1 的 SEA 解给出界面声压和体积速度,预计算传递函数用于预测腔室 2 测点声压。实验显示,两腔最大误差分别为 2.88 dB 和 3.02 dB。所提方法耗时 1009 s,相比耗时 20061 s 的全系统有限元计算快约 20 倍。
This work presents a fusion of finite element analysis (FEA) and statistical energy analysis (SEA) for calculating the mid-frequency response in a stepped acoustic duct comprising two chambers, Chamber 1 (0.644 × 0.045 × 0.045 m3) coupled to Chamber 2 (0.17 × 0.02 × 0.02 m3), arranged coaxially and driven by a loudspeaker at the outer end of Chamber 1. The system was tested in a fully anechoic room over 178 to 11220 Hz. Based on modal-number classification, Chamber 1 acted as a mixed 1D/3D subsystem over 1415 to 8913 Hz, and so was modeled statistically, whereas Chamber 2 remained 1D and was treated deterministically. The subsystems were coupled by an interface with impedance dynamically condensed to a single-degree-of-freedom. Absorption coefficients measured in an impedance tube were used to derive internal loss factors. Source characterization combined a multi-microphone approach for frequencies below the first cutoff at 3811 Hz and a plane-wave approximation for higher frequencies. The SEA solution for Chamber 1 yielded interface pressure and volume velocity, while pre-computed transfer functions predicted pressures at probe positions in Chamber 2. Experiments showed maximum errors of 2.88 dB in Chamber 1 and 3.02 dB in Chamber 2. The proposed method required 1009 s of computation, and is thus about 20 × faster than full-system FEA, which required 20061 s.
